- Home
- Used Inventory
- Advanced Search
- Used Inventory
- Used Tractors
- Used Hay Equipment
- New Inventory
- New Hay Equipment
- New Lawn Care Equipment
- New Products
- McCormick
- Compact
- Agriculture
- Specialty
- MacDon
- Combine Headers
- Windrowers and Headers
- Pull Types for Hay
- Scag Power Equipment
- Electric Mowers
- Zero Turn Mower
- Stand On
- Walk Behind
- Spreader/Sprayers
- Stand-On Blowers
- Wheeled Blowers
- Truck Loaders
- Vermeer
- Agriculture
- Fluid Management
- Landscape
- Pipeline
- Recycling
- Surface Mining
- Tree Care
- Utility Installation
- Vacuum Excavation
- Wood Waste
- Westfield
- Portable Augers
- Belt Conveyors
- Hoppers
- Woods
- Batwing® Cutters
- Rigid Rotary Cutters
- Finish Mower
- Seeders
- Groundbreaker® Backhoes
- Tillage
- Dirt Working
- Snow Blowers
- Flail Shredders
- Stump Grinders
- Hitches
- Loader Attachments
- Koyker
- McCormick
- Antique Parts
- Specials
- Contact Us
- Finance
- 28126 US Hwy 18 Mission, SD 57555605.856.2305Directions
- MENU
- Store Info
- Home
- Used Inventory
-
Advanced Search
-
Used Inventory
- Used Tractors
- Used Hay Equipment
-
New Inventory
- New Hay Equipment
- New Lawn Care Equipment
-
- New Products
-
McCormick
- Compact
- Agriculture
- Specialty
-
MacDon
- Combine Headers
- Windrowers and Headers
- Pull Types for Hay
-
Scag Power Equipment
- Electric Mowers
- Zero Turn Mower
- Stand On
- Walk Behind
- Spreader/Sprayers
- Stand-On Blowers
- Wheeled Blowers
- Truck Loaders
-
Vermeer
- Agriculture
- Fluid Management
- Landscape
- Pipeline
- Recycling
- Surface Mining
- Tree Care
- Utility Installation
- Vacuum Excavation
- Wood Waste
-
Westfield
- Portable Augers
- Belt Conveyors
- Hoppers
-
Woods
- Batwing® Cutters
- Rigid Rotary Cutters
- Finish Mower
- Seeders
- Groundbreaker® Backhoes
- Tillage
- Dirt Working
- Snow Blowers
- Flail Shredders
- Stump Grinders
- Hitches
- Loader Attachments
-
Koyker
-
- Antique Parts
- Specials
- Contact Us
- Finance
Use My Location
New Products / Vermeer / Agriculture / Round Hay Balers / REBEL® 5420 Baler
Double tap to zoom
Round Hay Balers REBEL® 5420 Baler
The Rebel Baler is designed for hard-working, independent operators who have a sharp eye for great values. These folks like to roll their own bales, on their own time, on their own schedule, using lower horsepower tractors. These smaller 60" (152 cm) diameter balers offer the perfect balance of simplicity, convenience ... + Read More
Not a current model
- Get a Quote
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
- Request Brochure
Request Brochure
Fields with asterisks* are required.
- Send to a Friend
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
- Payment Calculator
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circ*mstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
- Share
Features
- Advanced netwrap system makes net easier to feed, easy to operate. No more hassles with belts and rollers. Just feed net directly to the baler’s main belts.
- New balanced density system, with improved belt tracking, increases belt life produces better-looking bales. Also, Alligator® rivet belt laces are used for maximum strength.
- Fill the bale chamber corners and build square-shouldered bales with optional Haysaver wheels.
- With a 40 hp (30 kW) tractor, the Rebel 5420 Baler produces 5' diameter x 4' (1.5 m a 1.2 m) bales that weigh up to 1,000 lbs (454 kg).
- See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Specs
Bale Size
| Bale Diameter | 60 " | 152.4 cm |
| Bale Width | 47 " | 119.4 cm |
| Bale Weight | 1000 lbs | 453.6 kg |
Dimensions and Weights
| Length - Standard | 150 " | 381 cm |
| Length (With Net) | 171 " | 434.3 cm |
| Length (With Ramp) | 167 " | 424.2 cm |
| Height | 102 " | 259.1 cm |
| Height - With Inline Ramp | 95 " | 241.3 cm |
| Weight (Fully Optioned) | 4700 lbs | 2131.9 kg |
| Drawbar Weight | 680 lbs | 308.4 kg |
Bale Forming Chamber
| Type of Chamber | Variable | |
| Drive Roller Size | Two 5.5 " (14 cm) diameter steel with 1.94 " (4.9 cm) round bearings | |
| Drum Roller Size | 12 " (30.5 cm) with 1.8 " (4.5 cm) hex bearings | |
| Idler Roller Size | 3.5 " | 8.9 cm |
| Start Roller Size | 4.5 " | 11.4 cm |
| Number of Plys | 3 ply mini rough top | |
| Width of Belt | 6.8 " | 17.3 cm |
| Number of Belts | 5 | |
| Type of Lace | Alligator Rivet | |
| Length of Belt - Long | 441 " | 1120.1 cm |
| Length of Belt - Short | 429 " | 1089.7 cm |
Drive System
| Driveline | 80 deg CV, 540 RPM | |
| Roller Chain | Single 60 | |
| Torque Protection - Main Input Shaft | Radial pin clutch | |
| Bearing and Sprocket Configuration | Round drive shafts and bearings - Hex shaft on drum |
Tractor Requirements
| Horsepower Required | 40 hp | 29.8 kw |
| Horsepower Recommended | 50 hp | 37.3 kw |
Pickup
| Width (Tooth to Tooth) | 43.5 " | 110.5 cm |
| Width (Hay Saver Wheels) | 73 " | 185.4 cm |
| Width (On Outside Flair) | 58 " | 147.3 cm |
| Tooth Bars | 4 bar single cam track | |
| Number of Teeth | 32 rubber mounted double tines | |
| Stripper Band Diameter | 12.6 " | 32 cm |
| Drive | Single 60 roller chain | |
| Floatation | Spring |
Standard Details
| Bale Formation | Open throat vertical chamber with drum, hydraulic/spring belt tension | |
| Monitor/Controller | Manual/electric twine | |
| Machine Adjustments | Pickup height and hydraulic density setting | |
| Safety Equipment | SMV sign, tail lights | |
| Tailgate Cylinders | Standard hydraulic cylinders | |
| Density System | Adjustable hydraulic system to vary bale weight | |
| Tire Size - Standard | 11L-15 |
Bale Monitor
| Monitor | Bale Expert | |
| Number of wraps per bale for Net Wrap | Yes | |
| Number of Start/Center/End wraps for twine | Yes | |
| Auto Start Advance | Yes | |
| Manual Override | Yes | |
| Pause function | Yes | |
| "Near Full" and "Full Bale" alarms | Yes | |
| Alarm on/off/volume control | Yes | |
| Real-time bale size data | Yes | |
| Real-time moisture data | Optional | |
| Bales per hour | Yes | |
| Monitor Mount | Suction Cup Mount | |
| Self-diagnostic monitor and sensors | Yes |
Optional Features - Twine Tie System
| Feed Mechanism | Single arm applying two twines | |
| Twine Tension | Adjustable spring tension plates | |
| Twine Storage | 4 ball capacity |
Optional Features - Netwrap System
| Feed Mechanism | Friction pan onto main belts | |
| Net Tension | Brake system varies tension to maximize bales/roll of net | |
| Net Width | Capable of standard and over width netwrap; 48 " and 51 " (121.92 cm and 129.54 cm) |
Optional Features
| Pickup Lift | Manual lift crank | |
| Safety Equipment | Fire extinguisher, safety chain | |
| Hay Saver Wheels | Widens effective width of the pickup | |
| Mechanical Bale Counter | To keep field counts resets to zero | |
| Bale ramp | Axle bolt on, spring loaded | |
| Monitor | Bale Expert | |
| Restrictor Plates | To reduce HP required in less than ideal conditions | |
| Hydraulic Density Gauge | Allows operator to see actual pressure setting | |
| Miscellaneous | Extended Limited Warranty Coverage | |
| Hydraulic Pickup Lift | Replaces manual lift crank |
Contact Us
- Mission, SDContact Us
28126 US Hwy 18
Mission, SD 57555Phone: 605.856.2305
Fax: 605.856.2607Monday-Friday : 8am to 5:30pm
Saturday : 8am to 12pm
Sunday : Closed all day
Quick Links
- Used Inventory
- New Products
- Antique Parts
- Specials
- Finance
Send Us A Message
Copyright © 2024 - All Rights Reserved - EquipmentLocator.com
Sitemap |Privacy |Terms
